Silahkan gunakan box nokia yang anda punya, pilih nokia 105 rm908. Kemudian isi bagian content saja ya...karena kalau flash semua malah ga bisa bisa.:)
Berikut ini log menggunakan ATF:
Berikut ini log menggunakan ATF:
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...
******************************************************
TIME STARTS HERE
******************************************************
Sending PBL 19456 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v
Processing Image File: C:\Users\user\Downloads\Compressed\RM-908_v03.10_059S9F8_English\RM-908_v03.10_059S9F8_English\rm9080_nai03.10ec
Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00EB0000~0x00F161BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 418240 bytes
Data Checksum: 7E6F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Exit Flash Mode Done...
Time Elapse : 00:00:10
******************************************************
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
******************************************************
Waiting For Phone to go Online...
5, 4, 3, 2, 1...
MCU: V 02.70 22-02-13 RM-908 (c) Nokia
IMEI: 358134057846011
Product Serial Number: 19CCF0DBH
Product Code : 059R485
Module Code : 0205453
Basic Production Code: 059Q858
PPM SW Version : V 02.70 22-02-13 RM-908 (c) Nokia ME
ADSP Version : p V 03.10\n29-05-13\nRM-908\n(c) NMP\nec
MCU SW Version : V 02.70 22-02-13 RM-908 (c) Nokia
HW Version : 1001
UEM Version : 1328
UPP Version : 8850
LCD Version : CMI:BEIHAIv01 ILI9163C
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC : 11
PROVIDER : Default Test Operator
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED
FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
link nya om
ReplyDeletehelp me....