Solusi LG P765 Matot

7:24 AM  ,  10 comments
Dapat operan dari konter katanya matot...

langsung saja saya bongkar mesinnya kemudian lakukan direct emmc...

isi bagian user area saja, oiya waktu itu saya pakai ufi box.

pin out bisa lihat di bawah ini, dan filenya bisa download disini






10 komentar:

  1. vortexmildApril 11, 2016 at 3:50 AM

    gan masukinnya du ufi lite atau box trus bagi confignya dong..

    ReplyDelete
  2. dyonscellApril 10, 2017 at 9:39 PM

    perasaan file backupan box ufi tidak seperti itu

    ReplyDelete
  3. UnknownApril 14, 2017 at 5:05 PM

    Emmc pakek apa yaa gan.mksi

    ReplyDelete
  4. UnknownAugust 20, 2017 at 12:25 PM

    cid nya gan

    ReplyDelete
  5. MarcopsiteOctober 23, 2017 at 11:05 AM

    Kasusnya sma kyk ane gan, pertolongan pertamanya gimna dlu kl mau cek sofware apa hardwarenya yg rusak??? Soalnya hh tiba" bayi saat di carger

    ReplyDelete
  6. niko-cellulerJuly 31, 2018 at 10:46 AM

    CMD Pullup Level:1381 mV
    CMD Active Level:1309 mV
    eMMC Device Information
    EMMC CID : 90014A2058494E594812A1AA4A9E9F1C
    EMMC CSD : D02701320F5903FFFFFFFFE78A4040E2
    EMMC Manufacturer ID: 0090 , OEM ID: 014A
    EMMC Date: 09/2012 Rev.0x12
    EMMC NAME: XINYH , S/N: 2712291998
    EMMC ROM1 (Main User Data) Capacity: 3696 MB
    EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
    EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
    EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
    Extended CSD rev 1.5 (MMC 4.41)
    Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
    Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
    Backup saved: XINYH_2712291998_20140603_1522.extcsd
    Done.
    Чтение , стирание проходит на ура. Попытка записи:


    Skip loading eMMC Addon Firmware
    CMD Pullup Level:1381 mV
    CMD Active Level:1309 mV
    Writing 000002000000 bytes to 00000000 ...ROM1 (USER ROM)
    Retry writing adress 0x00000000 (Attempt #1)...
    Retry Fail !!!
    Retry writing adress 0x00000000 (Attempt #2)...
    Retry Fail !!!
    Retry writing adress 0x00000000 (Attempt #3)...
    Retry Fail !!!
    Write Block Failed, Reason: DATA SND CRC Error
    В чем причина?

    ReplyDelete
  7. PaipaiApril 11, 2019 at 9:19 PM

    nice info min
    solder infrared

    ReplyDelete

Subscribe to: Post Comments (Atom)